General introduction
- Use 2 rolls of single-layer film to carry out packaging.- Heat-pressing bar and 2-layer film are installed on the L-type film feeding machine.
- The machine operates with high efficiency for both PE film
- Design can be selected according to the angle,
straight line and freedom of feeding direction and finished product output requirements.
Technical parameters
| Type: | HS-052 |
| Dimensions (length ×width): | 1750mm×660mm |
| Extrusion line size: | 500mm |
| Film width (max): | 450mm |
| Packaging range: (mm) | W 50～400×L 100～350×H 50～150 |
| Machine capacity: | Max 20pcs/min |
| Power supply: | 3 phase 200V 50/60Hz 2KW |
| Compressed air: | 0.5Mpa |
| Packaging form: | Thermal cutting knife |
